Basket (0)
Close
-
-
Roll Maker Set – XL version
Original price was: £12.80.£12.25Current price is: £12.25.Roll Maker Set - XL version
Roll Maker is the ultimate tool to make all kind of tubes, tentacles, and wires to be used with any kind of putty or clay. Depending on your sculpting material you may need to wet repeatedly the plates or your fingers with bit of water to reduce stickiness. Adding talcum powder to water may help with some putties like Green Stuff. Use a toothbrush to clear any residue from plates if required, and never use wire brushes or metal implements since plates may be damages. Roll Maker XL will allow to make tentacles up to 75mm length without joints, and it also combinable with Roll Maker standard versión, since all plates are different in size. Guide bars are now stackable to allow you to make thicker pieces such us columns or trees. This set includes: 2 large plates - XL Version 2 curved plates - XL Version 2 small plates - XL Version 2 STACKABLE guide bars. Use them to hold the plates and to get an extra 45º position for new textures. This tool will give you endless of possibilities. -
Conductive Paint
Original price was: £6.67.£6.50Current price is: £6.50.Conductive Paint
Highly conductive water based paint with silver specially formulated for model and diorama building, or in electronics such as LED connections, circuit paths, repairing circuit boards and others. Can be used on a variety of surfaces including plastic, resins, metal, paper and wood. Paint must be applied in homogenous layers, without needing to be too thick. Once the paint has fully dried, it will act as a conductor of electricity up to at least 30-40cm without losing any conductivity. We recommend to use 3V to 9V batteries. Content: 1x 15ml bottle * Not valid for airbrush. -
Rolling Pin Display 5×5
Original price was: £15.37.£15.00Current price is: £15.00.Rolling Pin Display 5x5
-
Brown Stuff Tape 36,5 inches
Original price was: £12.16.£11.75Current price is: £11.75.Brown Stuff Tape 36.5 inches
Kneadatite Brown Stuff it is a room-temperature curing two-part epoxy/polyamide putty. Excellent adhesion to metal, and 90 minutes of work life. Brown Stuff is similar to Green Stuff but sets slightly harder and remains malleable. Brown Stuff has a thicker consistency so it is a little easier to work with for beginners. Brown Stuff can be mixed with other putties to vary the carving and working texture and also the final hardness. Cures very hard, great for finer details such as sharp tips, points, weapon blades, armours, and other hard-line details. Both strips of material in the package are not in contact, to avoid waste of material. This set contains 36.5 inches of material --> 93 cm -
Sculpting COLUMN Cork for armatures
Original price was: £3.89.£3.30Current price is: £3.30.Sculpting COLUMN Cork for armatures
Sculpting column cork to hold firm your miniatures while you are working on it. It makes it very comfortable to hold and to rotate into any position you want. Their bases are wide enough not to have your project fell over. Dimensions: - Upper base 5 cm - Lower base 5 cm - Height 10 cm This set includes 1 column cork. -
Sculpting Cork XL for armatures
Original price was: £2.40.£1.80Current price is: £1.80.Sculpting Cork XL for armatures
Conical sculpting cork to hold your miniatures while you are working on it. It makes it very comfortable to hold and to rotate into any position you want. Their base are wide enough not to have your project fell over. Dimensions: - Upper base 7 cm - Lower base 7,5 cm - Height 4 cm This set includes 1 cork XL. -
Sculpting Cork for armatures
Original price was: £1.75.£1.45Current price is: £1.45.Sculpting Cork for armatures
Conical sculpting corks to hold your miniatures while you are working on it. It makes it very comfortable to hold and to rotate into any position you want. Their base are wide enough not to have your project fell over. Dimensions: - Upper base 5 cm - Lower base 5,5 cm - Height 4 cm This set includes 1 cork. -
Flexible Armatures in 25 mm
Original price was: £4.75.£4.50Current price is: £4.50.Flexible Armatures in 25 mm
As alternative to simple wire armatures, we introduce the Precast Flexible Armatures which are semi-finished figures known as Dollies that you may pose and use as the start of a new figure sculpture. These are just like pre-made human frame which will speed up the process of making your own miniature keeping the scale proportion consistently. Sculpting armatures are all advantages specially for a novice sculptor, since they will help to get over problems with proportion and sizes. Dollies will save a lot of time during the building work that needs to be done with a wire armature. This armatures are considered "flexible" since they can be bent into a chosen pose to be worked on with sculpting putties to finish them off. They have lot of bending points along the body to help on this task. And finally, as the latest innovation, they also have spikes in their feet to help when fixing them in the sculpting corks. Take into account that they tolerate bending, but extreme bending might break them. Ovenable up to 200ºC This sets includes 5 precast armatures / dollies in 25mm * These armatures contain LEAD and other metals to varying degrees and are not suitable for Children under 15 years of age. You should wear gloves to manipulate them. -
Flexible Armatures in 28 mm
Original price was: £5.50.£5.25Current price is: £5.25.Flexible Armatures in 28 mm
-
Flexible Armatures in 32 mm
Original price was: £6.00.£5.70Current price is: £5.70.Flexible Armatures in 32 mm
-
Micro STEEL Balls (2-4mm)
Original price was: £3.85.£3.75Current price is: £3.75.Micro STEEL Balls (2-4mm)
-
Paint Revitalizer 60ml
Original price was: £5.85.£5.75Current price is: £5.75.Paint Revitalizer 60ml
-
-
Set x8 Acrylic Wash Ink Paints
Original price was: £21.25.£18.50Current price is: £18.50.Set x8 Acrylic Wash Ink Paints
-
Set x6 Intensity Inks – Set 2
Original price was: £15.93.£14.50Current price is: £14.50.Set x6 Intensity Inks - Set 2
